Checking For Connection To VBS3
When VBS3Strike loads, both timers display zero seconds (0s). As soon as VBS3Strike connects to a VBS3Strike scenario, then the timers will instead display 00:00:00 and then the Simulation Timer will commence from starting time (most often 12:00:00 ) and Real Timer will commence ticking from 00:00:00. This change in the timer display format is an indication that VBS3Strike has successfully connected to the VBS3 scenario.
∆ Image 1d: Simulation Status window after VBS3Strike connects to VBS3 |
Once the timers start to run you will see another window opening up. This window will indicate the Assets are being loaded. After the loading is completed it will be closed automatically.
∆ Image 1e: Strike asset loading window |
Note:
The default starting time of VBS3 is 12:00:00. But it is possible to specify any desired starting time using VBS3 while creating the mission. If you set time other than 12:00:00, then the Simulation Timer will commence from the specified time. Also using the VBS3Strike application the time can be changed, and the Simulation Timer will change accordingly.